top of page

Sundial | João da Silva | Diptych | Wood | 1890

6 hours ago
6 min read

Series SUNDIALS

By: Sílvio Pereira



- Diptych pocket sundial (or "Mediana");

- Maker: João da Silva - Portugal

- Material: Wood

- Dimensions (closed): Width 46.1mm; Depth 69.1 mm; Thickness 184 mm.

(open): Width 46.1mm; Depth 69.1mm; Height 74.6 mm

- Weight: 30.34 g;

- Description: Made up of two plates joined by a hinge: the vertical one with an image of the sun and floral motifs; the horizontal one with a compass and the hour scale on which the shadow of the gnomon falls, the gnomon being a cord that links the two faces. When the two plates are brought together, the sundial is closed.

- Case: Wood. Dimensions (closed): Width 101 mm; Depth 65.8 mm; Thickness 47.5 mm

- How to use: Place the sundial on a level surface. Point the compass to north. Raise the vertical plate so that it forms a 90º angle. The shadow cast by the gnomon on the sundial's hour scale will show the time.

Note - The sundial shows solar time, which may differ from clock time.


Other pieces in the collection


Sundial | João da Silva | Diptych | Wood | 1885

(with plumb line)


Sundial | Tempus | Diptych | Wood | 1950



The origin of the diptych or "mediana" pocket sundial


The earliest known diptych pocket sundials (also called "medianas") date from 1598; they were made in Nuremberg and created by Hans Tröschel (1549-1612). They were originally made of ivory inlaid with black lacquer markings. The gnomon was a braided cord of black silk, linen or hemp.


First diptych sundial in ivory made in Nuremberg in 1598 by Hans Tröschel (above open, below closed)



The growing production of mechanical clocks during the Renaissance stimulated the construction of a variety of timekeeping instruments. Sundials were used to set mechanical clocks and also to regulate their still inaccurate movements. Sundials multiplied in both variety and number, but the sundial makers of Nuremberg specialised in small, folding and easily portable models made of ivory or wood.


This type of dial, which can be used to tell the time in several different hour-counting systems, was made for use at Nuremberg's latitude of 49 1/2 degrees. Other portable sundials made in Nuremberg could be adjusted for use at various latitudes.


What is a diptych or "mediana" sundial?


The diptych, as the name suggests, consists of two small flat plates joined by a hinge. When closed, they form a small box suited to the pocket. The gnomon is a cord whose ends are fixed to each of the plates. When the plates are opened, the cord becomes taut, forming the two faces of a sundial: the vertical and the horizontal. The plates making up the sundial were usually made of wood, except for the early ones produced in Nuremberg, which were of ivory.


In Portugal these sundials began to appear at the end of the 19th century and were a great help to the poorest, who could not afford mechanical pocket watches: above all to shepherds, who thus had a time reference for their herding, but also to less well-off farmers, whom they helped to organise their farming work.


Some pieces made by João da Silva at the end of the 19th century (open and closed)


It is at this time that the name of João da Silva begins to appear on the cases of the "medianas" (another name given to these sundials) sold at fairs. They were cheap and quite reliable, yet few examples have survived (the Museu de Etnologia, for example, has none on display). Curiously, the example held at the Oxford museum was bought in Spain in 1900, which suggests that this type of sundial, patented by João da Silva, was not only popular in Portugal but also "crossed" the border.



Example made by João da Silva on display at the Oxford Museum


Although several makers of these sundials are recorded, in fact only João da Silva took care to patent his production and to put his name on every sundial he made, first only with the designation "Autor" and finally with his own name "João da Silva"


How solar time works


Sundials measure time exactly as it is. Noon is marked when the sun is highest in the sky (when it crosses the meridian). The clocks and watches we use every day measure time by convention, with tomorrow's noon exactly 24 hours, 0 minutes and 0 seconds after today's. But noon on 24 December is 24 hours, 0 minutes and 29 seconds before noon on Christmas Day. And noon on 15 September is only 23 hours, 59 minutes and 39 seconds before noon on the following day.


In Winter the days are short and the sun is low in the sky. Each day after the Winter solstice, which occurs on 21 December, the sun's path rises a little higher in the southern sky. The sun also begins to rise closer to the east and set closer to the west, until we reach the day on which it rises exactly in the east and sets exactly in the west. This day is called the equinox. We mark the Spring equinox on 21 March and the Autumn equinox on 21 September.


The sun is on its lowest path in the sky at the Winter solstice. After that day the sun follows a higher and higher path across the celestial sphere each day until it stays in the sky for exactly 12 hours. Every place on Earth has a 12-hour day twice a year, at the Spring and Autumn Equinoxes.


At the Summer solstice the sun is on its highest path in the sky and the day is the longest. Because the day is so long, the sun does not rise exactly in the east; it rises in the north-east and sets in the north-west, allowing it to stay in the sky for a long time.


After the Summer solstice the sun follows a lower and lower path across the celestial sphere each day until it reaches the point where it is in the sky for exactly 12 hours again. This is the Autumn Equinox. As at the Spring Equinox, the sun rises exactly in the east and sets in the west on that day, and every place in the world has a 12-hour day.


After the Autumn equinox the sun keeps following a lower and lower path across the sky and the days grow shorter and shorter until it reaches its lowest point, and then we are back at the Winter solstice, where we began.


Technical definitions


Diptych sundial: A portable (pocket) sundial with a vertical and a horizontal dial hinged together and sharing a cord that links them, which acts as the gnomon and also ensures that, when opened, the two dials form a 90º angle corresponding to a specific latitude.


Vertical and horizontal dials and gnomon of a diptych sundial


To work, the two dials must be correctly positioned on the two plates. When the sundial is opened, the plates must be at right angles to each other.

This position is achieved by using a gnomon cord of a specific length, so that once opened the two plates form a perfect "L".


First, place the sundial in the horizontal position. Then measure the distance "H" from the origin of the dial to the upper edge of its plate. The distance "V", from the origin of the vertical dial to the lower edge of its plate, can be calculated as follows:


V= H tan ø


Where ø is the latitude of the place where the sundial will be used.


The vertical dial can now be correctly positioned on its plate.


The two dials are now hinged at the base and a small hole is made at the origin of each dial. The dials are opened so that they form a right angle with each other. The ends of the cord are passed through the two holes and tied so that the cord is taut when the dials are opened to the reading position. This is just one way of fixing the cord.


Another option is to fix a plumb line to the vertical dial to make sure it is always vertical when open. A spirit level can be fitted to the horizontal plate to level the dial.


To read the time correctly, the dials must also be aligned with the North Pole. Sundials of this type include a small compass set into the horizontal plate.


Diagram of the shadow cast on the vertical and horizontal dials











Comments

Rated 0 out of 5 stars.
No ratings yet

Add a rating
bottom of page